#Tim armstrong fender crack#

Sunken top across the soundboard between bridge and fingerboard.

Hump on the fretboard where the neck joins the body.

Using a digital hygrometer can help you monitor humidity levels around your instrument. A two-way humidifier will slowly absorb or release moisture inside your case, maintaining humidity to help ensure your instrument doesn’t suffer damage. The easiest way to do this is by storing your instruments in a case with a case two-way humidifier inside. So how do you prevent this kind of damage? Easy: by keeping your guitars and ukulele properly humidified (ideally between 40-60% RH).

#Tim armstrong fender crack#

Without adequate humidity control (especially in drier local climates), acoustic instruments can crack and their necks can warp, causing problems with fretting, intonation and playability. Similarly, excessive humidity can cause the wood to absorb moisture and swell, potentially causing other problems. For example, extended exposure to low relative humidity (below 40% RH) can dry out the wood, causing it to shrink and run the risk of cracking. Solid woods in particular are especially prone to the effects of climate fluctuation.

Shifts in temperature or relative humidity can affect your instrument in multiple ways, some of which can lead to costly repairs if you’re not careful.

We’re excited to be a part of your instrument buying experience.Īcoustic guitars and ukulele are made of wood, and wood is sensitive to changes in climate. After this, we do a final inspection and clean/detail the instrument before packing it up for shipment. Once maintenance is done, we stretch and tune the strings and play test the instrument.

We then move on to cleaning and oiling the fretboard along with the frets. We start by lubricating any moving parts on the instrument, such as tuning machines. If the instrument has electronics, we test all of the electronic components to make sure they are functioning properly.Īfter a thorough inspection, we then move on to maintenance. Any request made outside of manufacturer factory specifications can incur additional charges for parts and labor. Next, we check the playability and setup by inspecting and adjusting the truss rod (if available), bridge, nut, and frets to manufacturer factory specifications. All instruments are stored in a climate controlled environment and put through a 12-point inspection checklist before being shipped.įirst, we check the finish of the instrument, carefully inspecting any blemishes on the surface. Unique Features 4-ply tortoiseshell pickguard, 'Hellcat' position inlays, 12th-fret double-skulls inlay, Tim Armstrong signature on truss rod cover, cream body binding, black-painted headstock, synthetic bone nut and saddle, black bridge pins with white dotsĪt Easy Music Center, we care for our instruments from the moment they arrive to when they ship to your door.Tuning Machines Vintage-Style with Aged White Plastic Buttons.Strap Buttons Factory Mounted Forward Strap Button with Internal Block Reinforcement.

Body Material Solid Mahogany Top with Laminated Mahogany Back and Sides.Body Solid Mahogany Top with Laminated Mahogany Back and Sides.Position Inlays Hellcat and Double Skulls.